电站锅炉省煤器磨损分析-动力工程专业论文.docxVIP

)，原裂 ，.入学硕士研究生学位论文 THE STUDY OF EROSION ON THE ECONOMIZER OF THE BOILER IN THE POWER PLANT ABSTRACT The partial leakage caused by wear and its uncertain position on the economizer of the boiler have always puzzled the staff of the power plant. The leakage of the economizer has serious effects on the stability and economy of the unit operation. The method to confirm the places where the maximum wear will occur and to predict the maximum wearing thickness within a certain time is to be s阳died. This article analysis the factors which affect the wearing thickness on three aspects of economizers own structure，flow characteristics of the gas and the characteristics ofthe fly ash. The in-line and staggered bundle of the economizer are simulated by computational fluid dynamics software which uses the Euler method to caJculate continuous phase and adopts the Lagrange mcthod combining with the pa叫cle - wall rebound modcl to predict the particle trajectory accurately. The wear equation proposed by researchers recently will be compiled to the main program. 丁brough iterative calculation，the relationship between the particle size and the impact rate，the particle size and the wearing thickness are solved. The wear amount along the flow direction and the wearing position are also studied in the 11J ./  太原裂丁.大学硕士研究生学位论文 simulation. 1n order to verify the accuracy ofthe calculation program ，the results are contrast with the data from the economizer in the power plant. The characteristic parameters of the f1y ash in the simulation are acquired by the fining in Rosin-Rammler distribution a且er the sampling and screening. The study shows that the impact rate grows when the particle diameter increases. The controversy about the p盯ticle size effects on the wear of the bundle exists all the time. This article holds the opinion that the wearing thickness increases with the raise of parti cJe diameter for the first row of the bundle in line，but it increases first and