肥料成粒相关影响因素的分析-土壤学专业论文.docxVIP

山西 山西师范大学学位论文 II II I I 热方式对成粒的影响，从而为肥料造粒提供试验依据。 【关键词】固体粘结剂 休止角 预混合 微波加热 【论文类型】基础研究 英文摘要 Title: The study of relevant factors on fertilizer granulation Major: Chemistry Name:Guo Jinyu Signature: Supervisor: Liu Er Bao Signature: Abstract The project explores the effect of relevant factors on fertilizer granulation from two aspects: various solid binder (such as light calcium carbonate, attapulgite, yellow desulfurization gypsum) and the granulation process parameters. Through studying the repose angle change trend between fertilizer and solid binder, we explore the formation mechanism of solid adhesive particle so as to construct the association between angle of repose and fertilizer granulation. In the 28-6-6 trial, by changing the solid adhesive mixing way and connected with the microwave heating method, we explore the role of granulated fertilizer, providing a theoretical basis for the industrialization of the product. Firstly, comparing the repose angle change trend between different solid binders (PCC, attapulgite and yellow desulfurization gypsum) and single fertilizer potash fertilizer, nitrogen fertilizer, mixed25-0-5 series, we found that the angle of repose materials with the addition of solid adhesive was significantly increased in 4~7.5 degrees. This is mainly caused by the internal structure of solid adhesive PCC, attapulgite and yellow desulfurization gypsum. And within this range, the ratio of granulating effect is the best. Based on this, we can establish fertilizer particle formation mechanism model, which can provide theoretical basis for the solid adhesive used in fertilizer production. Secondly, the situation of grain in 28-6-6 compound fertilizer was carried in laboratory, pilot and large test. We get the best ratio of solid binder and explore the physical chemical behavior between the fertilizer particles and binder in the process of solid particle. Through the test, we identify the effect of prem