测井网络通信终端的设计与实现信号与信息处理专业论文.docxVIP

ABSTRACTABSTRACT ABSTRACT ABSTRACT In recent years，computer networking has been facilitating the process which the Intemet technology is used to develop the data transmission system in the well logging． However，due to the effects of severe environment and the bulk data transrnission from imaging logging tools，the well logging transmission system based on networking put forward higher requirement for efficiency of the transmission，the reliability and the universality．T11is paper applied a kind of embedded Ethemet technology to the well logging transmission system，which make multi-users be able to share well-logging data and improve the ability of the real-time processing of information when logging tool access Intemet through Ethemet using network connection witll remote hosts． ne logging communication terminal not only achieve the ability of the data transmission between logging tools and remote hosts and time synchronization between logging tools and telemetry instruments，but also call work normally under hi gh temperature and high pressure．Based on this target，this paper presented the current tendency about logging technology in detail and explained the Ethernet technology witll embedded system．Applying the Ethemet access mothod by 1 0BASE2，it is proposed that the system architecture is based on the hardware、Ⅳim ARM processor and FPGA． The contents of this thesis are outlined as follows： 1．In system architecture，this thesis anlyzed the requirment of this design in detail and proposed a system solution suitable for logging environment． 2．In hardware platform，this thesis selected TMS470R1VF processor based on ARM7 and implemented the hardware module design． 3．In software platform，this thesis described the process of porting p,C／OS—II and LwIP and developed the driver program for networking interface． 4．On the module of application layer,this thesis studied and anlyzed the protocol of time synchronization．砀e data transmission module based on TCP and the time synchron