搅拌机参数优化及其试验研究-机械设计及理论专业论文.docxVIP

摘 摘 要 强制式搅拌机是目前常见的机种之一，应用广泛。对其参数的优化具有重要 的工程应用价值。 本文在分析强制式搅拌机特点的基础上，探讨了与搅拌质量有关的参数，并 给出了各参数优化的目标，利用正交试验设计方法，确定了试验研究的主要内容 包括关键参数的优化试验和多参数综合匹配的优化试验，根据试验内容和试验目 的，设计了试验样机。 关键参数优化试验结果表明：逆流相位差应大于单轴相位角；搅拌臂排列形 式采用正正交错排列和正正平行非连续排列：搅拌机长宽比的选择范围为O．7～ 1．3：推荐叶片线速度为1．4耐s～1．7耐s。 多参数匹配试验结果给出了主要结构参数的匹配关系。即双卧轴搅拌臂料流 取围流排列；单轴搅拌臂相位角为60。；拌筒采用宽短型；叶片安装角为35。。 经过优化后的搅拌机搅拌质量好，能耗低，结构比较简单，便于工业化推广。 关键词：强制式搅拌机：正交试验；参数优化：试验研究 Abstractourrentlyt11e Abstract ourrentlyt11e forced action mixer has been used popularly in most project，so its par锄eters optimization is very valuable Based on the character of forced action mixer，this paper studies the parameters concemed mixing quality，锄d puts ponvard optimization aim．With me help of orthorhombic experiments，the main research has been determIned which Includes optimization expenments of the key parameters optimization a11d multi-pammeters compreheIlsiVe matching．The pmtotype w船designed baSed on coment aIld aim of me experiment． The experiment results of key par锄eters optimization show that PhaSe a119le of adverse circulation should be 1a唱erthall mixing anTl’s phaSe a1191e on the single shaft． For tlle amngemem’s principles of mixing anlls， double—positiVe—inerlaced and double—positiVe-parallel dissuccssiVe arrangements are recommended．Len百h—widen mtio ofmixillg trough should be choosed矗．om 0．7～1．3 and the range ofline—speed of mi)【ing blades is 1．4111／s to 1．7111／s The experiment results of multi-par锄eters comprehensiVe matching giVe out the mtional matclling ralationship．The arrallgement of mixing aⅡns should be arounding circulation fb册．Phase an91e of mixing姗s on single shaft is 60。，length-“den mtio ofmixing trough less thaIl 1 a11d mixing blades set at aIl a119le ofabout 35。 The optimized working device can improve mixing quality with smaller ene唱y consumption aIld t11e organizations are simpler，so it is easly be indusmalizcd Key words：Forced action mixer Orthorhombic experiments Par锄eter optimization Experimental research II 论文独创性声明本人声明：本人所呈交的学位论文是在导