胶订联动线立体凸轮摆杆机构的分析与设计-印刷包装技术与设备专业论文.docxVIP

目录 目录 西安理工大学硕士学位论文 西安理工大学硕士学位论文 III III IV IV Title：THE ANALYSIS AND THE DESIGN OF THE CAM SWING LINK MECHANISM OF THE BINDING LINE Major：Technology and equipment of printing and packaging Name：Shoubin Song Signature: Supervisor：Prof. Ganghu CHENG Signature: Abstract Perfect binding process makes perfect binding lines of comparative advantage has become increasingly widespread application. In the binding line, the book holding plate which contains a solid cam groove wheel swing link mechanism be responsible for clamping the book after book plate mechanism milling back, glue, paste the back process, and finally will separate the book binding into the finished book. Ensure the quality of products under binding, extend the service life of the spring, improving the institutional dynamic characteristics and reduce the clamping force fluctuations and other issues. The topics is to the actually demand. This paper takes a type parameter according to one company. According to the three-dimensional cam rocker mechanism, This paper carried out the following research: (1)based on the book clamping plate mechanism of original geometry parameters and the cam contour curve, with the method of mechanism kinematics theory, analysis of the movement mechanism, reveals its shortcomings; ( 2 ) according to identify deficiencies, revision of cam follower and the actuator boundary conditions, selecting modified sine acceleration motion modified cam contour curve fitting, the corresponding design, and the optimized mechanism motion analysis of the corresponding curve; and then the modeling and simulation with Pro/E software, find the centric each member, and simulate the motion performance of the improved mechanism analysis. The papers have studied the mechanical rigid dynamic analysis by the Alembert principle, and have gotten all kinds of components’ law of motion in a cycle. The results show that the improved body forces are stable and good dynamic performance; The organization cond