采矿工程毕业设计（论文）-开滦集团范各庄东矿1.5Mta新井设计.docx

全套图纸加扣 3012250582 华北科技学院 2016 届采矿工程毕业设计 设计总说明 本设计包括两个部分：一般部分和专题部分。 一般部分为开滦集团范各庄东矿 1.5Mt/a 新井设计，全篇共分为十个部分：矿区概 述及地质特征、井田境界及储量、矿井工作制度、设计生产能力及服务年限、井田开拓、 采区巷道布置、采煤方法、井下运输、矿井提升、矿井通风与安全和设计矿井主要经济 技术指标。 范各庄东矿井田位于河北省唐山市古冶区境内。井田南北走向长 5.5km，东西最大 倾斜长 3 km，井田总面积为 14.86km2,为开平煤田的一部分。本井田内的主要可采煤层 5#煤、7#煤，主采煤层 5#煤厚 3.05m，倾角平均为 14°。井田内工业储量 18230.5 万 t，可采储量 10683 万 t。矿井瓦斯相对涌出量为 0.649m3/t，瓦斯绝对涌出量为 5.89m3/min, 为瓦斯矿井。水文地质条件为极复杂，矿井涌水量约为 1200m3/h。煤层有爆炸危险性，有自然发火倾向。 范各庄东矿年设计生产能力 1.5 Mt/a，服务年限 54 年。采用立井两水平上山开拓，暗斜井延深至-800m 二水平。第一水平标高-510 m。矿井采用综合机械化采煤法。 矿井布置一个综采工作面保证全矿井的产量，长度 180 m，煤在运输大巷的运输采用胶带输送机运输。矿井的通风方式采用中央分列式通风。 专题部分是超高水材料充填开采基础理论及其工程应用。 关键词： 新井设计；设计生产能力；立井两水平上山开拓；中央分列式通风； - 1 - 开滦集团范各庄东矿 1.5Mt/a 新井设计说明书 Design General Description This design consists of two parts:the general part and the special part. The general part for Kailuan Fangezhuang mine south 1.5Mt / a new well design, which is divided into ten parts: overview of mining area and geological features, mine realm and reserves, mine system, design production capacity and service life of mine development, mining roadway layout, mining method, underground transport, mine hoist, mine ventilation and safety and design of mine main economic and technical indicators. Fan Zhuang mine field is located in the territory of Tangshan City, Guye Province, Hebei province. North and south to the long 5.5km, the biggest tilt long 3 km, the total area of 14.85km2, as part of the Kaiping coalfield. The main mining coal seam has 5# coal, 7# coal, the average thickness of 4.1m, the average angle of 14 degrees. The industrial reserve is 182.305Mt, the workable reserve is 142.445Mt. The relative emission of mine gas is 0.649 meters 3/t, and the absolute gas emission is 5.89 meters 3/min, which is a low gas mine. The hydrogeological condition is very complicated. Coal seam has the risk of explosion, there is a tendency of spontaneous combustion. The design and production capacity of 1.5 Mt/a, the service life is 51 years. The shaft two level mountain de