集中载荷作用下厚矩形板的弯曲问题理论及其工程应用-结构工程专业论文.docx

燕山大学T学硕士学位论文Abstract 燕山大学T学硕士学位论文 Abstract Nowadays，thick plate is widely applied in many fields including architecture，port，shipbuilding and machine manufacture．With the thickness of plate increasing，elastic thin plate theory without considering the effect of transverse shear deformation has already been inapplicable fur the calculation of thick plate．Therefore，the researches of the bending of thick plate have the important signification in theory and engineering． Firstly,Reissner theory was introduced．It’S fundamental equations，stress fimction，boundary condition and free comer static condition were all given． Secondly,This paper generalized reciprocal theorem to solve the problems of the bending of thick rectangular plate based on Reissner theory．The reciprocal theorem fur thick plate was given and proved right in theory and application． Thirdly,according to the virtual basic solution of thick rectangular plate， reciprocal theorem for thick plate and free comer static condition，the bending of thick rectangular plates谢t11 different boundary conditions under a concentrated load，such as thick rectangular plate with two opposite edges fixed， the third edge simplY supported，and the fourth edge free．etc，were solved using the reciprocal theorem method．The numerical values were given and compared with the results f}om ANSYS．Then．boundary values ofthick plate and thin plate were given by a lot of calculation work．FinMly，the method introduced in this paper was applied to solve the actual project，and the accurate values were given，and then compared with the traditional results，the results ofthe paper WOrked out． Keywords Reissner theory；Free comer static condition；Reciprocal theorem； Thick rectangular plate；Concentrated load；Virtual basic solution； Different boundary conditions lI 燕山大学硕士学位论文原创性声明本人郑重声明：此处所提交的硕士学位论文《集中载荷作用下厚矩形板的 燕山大学硕士学位论文原创性声明 本人郑重声明：此处所提交的硕士学位论文《集中载荷作用下厚矩形板的 弯曲问题理论及其工程应用》，是本人在导师指导下，在燕山大学攻读硕士 学位期间独立进行研究工作所取得的成果。据本人所知，论文中除已注明部 分外不包含他人已发表或撰写过的研究成果。对本文的研究工作做出重