面向SOFC热管理系统的MPC555电控单元设计-控制理论与控制工程专业毕业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract With the problems of energy shortage and environmental pollution becoming more and more serious, people pay more attention to fuel cell technology research. Solid oxide fuel cells (Solid Oxide Fuel Cell, SOFC) is known as one of the most potential power generation technologies in the 21st century because of its high efficiency and zero pollution. At present, domestic and international in the pursuit of high-power, small size SOFC power generation system, in order to make it as soon as commercially. SOFC power generation system can be safe, efficient, stable operation of the premise is to maintain the stack temperature stable, so the main purpose of the SOFC thermal management system is effectively controlling the stack temperature. To maintain the high power of SOFC systems, while its small volume of a solution is highly integrated control system, thereby reducing its volume. By analyzing the characteristics of the SOFC thermal management system for its multi-input multi-output, nonlinear, strong interference, as well as large capacity lag characteristics, based on the SIMULINK designed cascade control algorithm of the system for effective control; and based on the applicability of the control algorithm and in order to reduce the size of the control system, the power control unit uses a 32-bit microcontroller MPC555 of MOTOROLA to design hardware platform, MATLAB support toolbox can easily download the control algorithm. By reading a lot of references, firstly, analyzing SOFC thermal management system carefully from the process structures aspect, including the amount charged to control the volume, the amount of simulation parameters, the amount of digital parameters, and the characteristics of its system; secondly, based on analyzing the system, we use a 32-bit microcontroller of MOTOROLA which calls MPC555 to design integrated electronic control unit for thermal management of SOFC; finally, based on MPC555 hardware plat