螺纹磨床数控系统的研究与开发-机械工程专业毕业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract With the rapid development of industry people have more and more demand on machining accuracy and surface roughness of mechanical products. Ball-screw plays a large role in machine tool drive. So screw-grinding quality directly affects the machining precision. However, the numerical control rate of current domestic screw grinding is low. It is common that the CNC system of screw-grinding machine have to be imported. In this context, Huazhong numerical control Co. Ltd. and Nanjing New-fangda numerical control Co. LTD. develop the screw-grinding CNC system jointly. HNC system is a open CNC system in a DOS supported environment, which provide the user a convenient second development environment. This thesis discuss the method of the special NC system developing. We successfully develop the screw-grinding CNC system by means of system-software modification, which complete the control of grinding-carriage speed and displacement automatically. The applications range of screw-grinding machine and automation level are improved. From the start of the mechanical composition of screw grinding machine, we analyzed the working principle of CNC screw-grinding machine, put forward and implement the key technology and the problem of this topic research. In addition, we analyzed and studied the common processing function of actual grinding operation process from a practicability angle of screw-grinding. In the end the CNC screw grinding machine is tested, and its result of measurement shows that the CNC system of grinding can fully satisfy the requirement of the user. Keywords: CNC screw-grinding machine,Tool-setting,Grinding compensation,Wheel dresser 独创性声明 本人声明所呈交的学位论文是我个人在导师指导下进行的研究工作及取得的 研究成果。尽我所知，除文中已经标明引用的内容外，本论文不包含任何其他个人 或集体已经发表或撰写过的研究成果。对本文的研究做出贡献的个人和集体，均已 在文中以明确方式标明。本人完全意识到本声明的法律结果由本人承担。 学位论文作者签名： 日期： 年 月 日 学位论文版权使用授权书 本学位论文作者完全了解学校有关保留、使用学位论文的规定，即：学校有权 保留并向国家有关部门或机构送交论文的复印件和电子版，允许论文被查阅和借 阅。本人授权华中科技大学可以将本学位论文的全部或部分内容编入有关数据库进 行检索，可以