拉深过程中声发射数据的回归分析-材料学专业论文.docxVIP

关键词：拉深；声发射；回归分析；速度 Abstract The acoustic emission is a phenomenon releasing elasticity energy in manner of wave with material or structural deformation or fracture by external force. Acoustic emission technique is a new advanced technology inspecting without damage, has been widely used in nondestructive testing equipment and online monitoring, As each material has different emission characteristics and each environment have different effects on the acoustic emission signals, AE technology needs to be study more in-depth to be used in wide area. In this paper, a large number scientific literature data inside nation and outside be referred, and acoustic emission technology applied in drawing. The headstream which the acoustic emission signals brought in the drawing has two genera, plasticity deformation and friction. As the friction in the process of the forming deformation with excellent lubricate may be ignored, it is considered that the source of the acoustic emission signals be from plasticity deformation mostly. The acoustic emission signals be composed of a series of telecom signal, the acoustic emission signal is more complex as sheet forming technics is complex and multiplex and as the acoustic emission signal is transient state and randomicity, so studying in-depth and meticulously is more need. In the paper the process of the drawing was detected and inspected by the acoustic emission, the acoustic emission signal collected under different conditions was studied and different factors fecting the acoustic emission signal was studied. The acoustic emission signal in the process of the drawing was collected and detected ,the diameter length, the speed of drawing and lubricating condition acting as independent variables, the amplitude, ringing counts, energy parameters acting as dependent variables, regression analysis was carried through. The drawing experiment is composed of 3 groups, first group is separately lubricating with sulfonated oil, with film conta