操作与配置CiscoIOS设备简介(PPT 68页).pptVIP

预先浏览端口配置情况 First, would you like to see the current interface summary? [yes]: Interface IP-Address OK? Method Status Protocol BRI0 unassigned YES unset administratively down down BRI0:1 unassigned YES unset administratively down down BRI0:2 unassigned YES unset administratively down down Ethernet0 unassigned YES unset administratively down down Serial0 unassigned YES unset administratively down down 自检过程中所找到的端口 * 设置全局参数 初始化全局参数 Configuring global parameters: Enter host name [Router]:wg_ro_c The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration. Enter enable secret: cisco The enable password is used when you do not specify an enable secret password, with some older software versions, and some boot images. Enter enable password: sanfran The virtual terminal password is used to protect access to the router over a network interface. Enter virtual terminal password: sanjose Configure SNMP Network Management? [no]: * 设置全局参数(续) 初始化协议配置 Configure LAT? [yes]: n Configure AppleTalk? [no]: Configure DECnet? [no]: Configure IP? [yes]: Configure IGRP routing? [yes]: n Configure RIP routing? [no]: Configure CLNS? [no]: Configure IPX? [no]: Configure Vines? [no]: Configure XNS? [no]: Configure Apollo? [no]: * 设置端口参数 BRI interface needs isdn switch-type to be configured Valid switch types are : [0] none..........Only if you dont want to configure BRI. [1] basic-1tr6....1TR6 switch type for Germany [2] basic-5ess....ATT 5ESS switch type for the US/Canada [3] basic-dms100..Northern DMS-100 switch type for US/Canada [4] basic-net3....NET3 switch type for UK and Europe [5]