微抛丸切削介绍毕业课程设计外文文献翻译、中英文翻译.docVIP

PAGE 目 录 1 英文文献翻译 1 1.1英文文献原文（Micro Shot Blasting of Machine Tools） 1 1.2中文翻译 11 2 专业阅读书目 17 2.1电气制图与电子线路CAD 17 2.2汽车为什么会跑.图解汽车构造与原理 17 2.3机械设计课程设计 17 2.4机械设计手册 18 2.5节能环保燃气锅炉控制系统设计 18 2.6基于PLC及模糊PID控制器的供暖锅炉控制系统设计 19 2.7蝶式太阳能热发电蒸汽温度与压力控制系统研究 19 2.8基于深度学习理论的机械装备大数据健康方法 19 2.9机械设备运行可靠性评估的思考 20 2.10中国汽车制造业集聚与企业区位选择 20 PAGE 7 英文文献翻译 Micro Shot Blasting of Machine Toolss D.M. Kennedy *, J. Vahey, D. Hanney Faculty of Engineering, Dublin Institute of Technology, Bolton Street, Dublin 1, Ireland Received 5 January 2004; accepted 3 February 2004 Available online 13 April 2004 Abstract Micro blasting of cutting tips and tools is a very effective and reliable method of advancing the life of tools under the action of turning, milling, drilling, punching and cutting. This paper outlines the ways in which micro blasted tools, both coated and uncoated have benefited from shot blasting and resulted in greater productivity, lower cutting forces, improved surface finish of the work pieces and less machine downtime. The process of micro blasting is discussed in the paper. Its effectiveness depends on many parameters including the shot media and size, the mechanics of impact and the application of the shot via the micro shot blasting unit. Control of the process to provide repeatability and reliability in the shot blasting unit is discussed. Comparisons between treated and untreated cutting tools are made and results of tool life for these cutting tips outlined. The process has shown to be of major benefitto tool life improvement. 2004 Elsevier Ltd. All rights reserved. Keywords: Micro shot blasting; Surface finish; Machine tools 1. Introduction Many modern techniques have been developed to enhance the life of components in service, such as alloying additions, heat treatment, surface engineering, surface coating, implantation processes, laser treatment and surface shape design. Processes such as thin film technology, plasma spraying, vacuum techniques depositing a range of m