酒店洗衣房烘干操作流程dry-area-funtion-squency-policy.docVIP

dry area funtion squency policy 烘干操作程序政策 批准人： 派送： 客房部 页数 PAGE 1 / NUMPAGES 2 Purpose目的: Establish departmental standard, accurate efficient data filling system. 建立部门标准和正确有效的数据存档系统。 Policy 政策: Procedure: 程序 The following chronological sequence is to be applied: 应按以下程序操作： Check to see that all lint filters are clean. 检查所有过滤器是否干净。 Load the linen items and garments to the proper capacity and start the drying sequence. 按容量装载布草和客衣后开始烘干程序。 Check the settings on the face of the dryer to make sure that they are appropriate and correspond to the load. 检查控制面板上的设置是否正确。 Fill in the production sheet by recording the time and the work category loaded into each drying machine. 在产量报告上记录时间和每部烘干机中装载的衣物种类。 Repeat the first four (4) steps for each drying machine. 每部烘干机均按前四个步骤重复操作。 As soon as the drying machine has completed its cycle, unload it and make sure those items such as table linen, sheets towels, etc., are brought to the folding area, and that garments and uniforms are brought to the finishing area. 一旦烘干机完成了操作应立即卸载并确保台布，毛巾等物品送至折叠区，客衣和制服送至整烫区。 Reload the drying machine and repeat the first four (4) steps. 重新装载烘干机并重复前四个步骤。 Clean all lint filters after each cycle and once a week blow air through steam coils. 每次操作完成后都应清洁过滤器，每周通过蒸汽管吹入空气。 Issue the completed and signed production sheet to the Supervisor concerned. 将完成并签名的产量报告交给相关的主管。