面向负荷的生产控制与JIT生产(英文版).pptVIP

Load-oriented manufacturing control just-in-time production for job shopsProduction Planning Control1994 Vol.5. Wolfgang BechteHannover consultant firm1998/08/18????? ??? ???第一页，共二十一页。 IntroductionA technique for job shops supporting the JIT concept - Using load-oriented order release, entry (Bechte, Kettner 1980)- Manufacturing control system is designed by Krautzig.- Implemented in many factories (Wiendahl, Bechte 1987~1991)Basic principles technique for Load-oriented manufacturing control Detailed computational procedure refer to more theoretical publication written by Wiendahl(1993), Bechte(1988)第二页，共二十一页。 content1. Objectives of load-oriented manufacturing control2.Structure of load-oriented manufacturing control3. Basic concept in load-oriented manufacturing control4.Overview of a load-oriented manufacturing control system5.Example of the control system第三页，共二十一页。 1. Objectives of load-oriented manufacturing controlReducing lead-time and WIP .Keeping actual lead-time on stable lowest possible level. - Permanently In/Out put, inventory and average lead time of W/C are monitored and compared with their planned values in dynamic wayAt the same time determine Bottlenecks, short mid-term capacity planningFurnishing realistic due-date scheduling and capacity planning第四页，共二十一页。 2. Structure of load-oriented manufacturing controlFlow of orders for one single machineIllustrating events, a hierarchical controller levels, sectionsFigure 1.Funnel model of job shop第五页，共二十一页。 Multi-level closed-loop control systemHigher controller level depends on theperformance of the lower one.CompanyDISPOSITIONJob ShopMachineSalesDue DateLead timeUtilizationMfg.AssemblyReceivingShippingSupplierCustomerDisturbancesProd ScheduleLong Term CapacitiesOrder EntryMid termCapacitiesOrder releaseShort termCapacitiesOperation SequencesCapacities LoadingFigure2. Multilevel closed-loop control system.第六页，共二十一页。 3. Basic concept in load-oriented manufacturing control3.1 Basic relationship at