单摆颚式破碎机设计说明书.docVIP

PAGE PAGE 6 摘 要 颚式破碎机又作鄂式破碎机，简称鄂破，主要用于对各种矿石与大块物料的中等粒度破碎，广泛运用于矿山、冶炼、建材、公路、铁路、水利和化工等行业。被破碎物料的最高抗压强度为320MPa。性能特点为破碎比大，产品粒度均匀，结构简单，性能可靠，维修简便，运营费用低。本设计的题目是颚式破碎机的设计，本文运用大学所学的知识，提出了颚式破碎机的结构组成、工作原理以及主要零部件的设计中所必须的理论计算和相关强度校验，构建了颚式破碎机总的指导思想，从而得出了该颚式破碎机的优点是高效，经济，并且安全系数高，对提高矿石的破碎效率，减少人工投入等等起到了很大的作用的结论。 关键词：颚式破碎机；矿山；强度；破碎效率 Abstract The Jaw Crusher is also known as the jaw crusher, referred to as the Epoch, and is mainly used for the medium size crushing of various ores and large pieces of materials. It is widely used in mining, smelting, building materials, highways, railways, water conservancy and chemical industries. The highest compressive strength of the broken material is 320 MPa. The performance characteristics are high crushing ratio, uniform product particle size, simple structure, reliable performance, easy maintenance, and low operating cost. The title of this design is the design of the Jaw Crusher. This paper uses the knowledge learned by the university and proposes the theoretical calculations and related strength checks necessary for the structural composition, working principle, and design of the main components of the Jaw Crusher. The general guideline of the Jaw Crusher was constructed, and it was concluded that the Jaw Crusher has the advantages of high efficiency, economy, high safety factor, and plays a significant role in improving the crushing efficiency of ore and reducing the labor input. The conclusion. Key words: jaw crusher; mine; strength; crushing efficiency 目录 TOC \o 1-3 \h \z \u 摘 要 1 Abstract 2 目录 3 1 绪论 5 1.1颚式破碎机简介 5 1.2破碎机的发展 6 1.2.1发展状况 6 1.2.2颚式破碎机的优化 6 1.3总体方案设计 7 2 颚式破碎机机构参数设计 9 2.1啮角α 9 2.2动颚摆动行程s和偏心距r 10 2.3传动角 11 2.4肘板摆动角 12 2.5连杆长度 12 2.6肘板设计 12 2.6.1肘板支撑方式选择 12 2.6.2肘板长度计算 13 2.7主轴转速 14 2.8生产能力 15 3 主要零部件计算与选择 18 3.1电动机功率计算和选择 18 3.2带传动设计 20 3.2.1带型选取 20 3.2.2传动比 21 3.2.3大小带轮基准直径 21 3.2.4带速 22 3.2.5轴间距 22 3.2.6所需基准长度 22 3.2.7实际