界面滑移效应下钢-混凝土组合梁总剪力和挠度.pdfVIP

第29卷第4期 南昌大学学报·工科版 Vol_29 No．4 2007年12月 Journal of Nanchang University(Engineering＆Technology) Dec．2007 文章编号：1006—0456(2007)04—0390—05 界面滑移效应下钢一混凝土组合梁总剪力和挠度 孙小菲 ， 吴春生 (1．南昌大学建筑工程学院，江西南昌330031；2、南昌同济规划建筑设计有限公司，江西南昌330046) 摘要：推导了钢一混凝土组合梁挠度和界面连接件承受抗滑移总剪力的计算公式。应用本公式计算结果与文 [1]按Goodman理论和文[2]按折减刚度法计算组合梁的挠度值很吻合。计算帽形冷弯薄壁型钢一混凝土组合梁 的挠度时，由于帽形冷弯薄壁型钢受拉，其凹槽中的混凝土随受拉开裂退出工作，应用本文公式计算此类型钢一混 凝土组合梁的挠度，挠度公式中惯性矩只须不计帽形型钢凹槽中受拉开裂的混凝土，这样计算的挠度与[3]文试验 帽形冷弯薄壁型钢一混凝土组合梁的实测挠度值很吻合，说明本文计算钢一混凝土组合梁挠度和连接件承受总剪 力的公式准确可靠。 关键词：帽型冷弯薄壁型钢一混凝土组合梁；挠度计算；抗剪刚度；连接件变形；总剪力 中图分类号：TU317 文献标识码：A Total Shear and Deflection of Stee1．Concre Composite Beams under Effect of Interface Slip SUN Xiao—fei ．WU Chun—sheng (1．School of Architectural Engineering，Nanchang University，Nanchang 33003 1，China； 2．Nanchang Tongji Planning Architectural Design Co、Ltd，Nanchang 330046，China) Abstract：The formulas for calculating total shear subjected to ant-stip by connectors in the interface are de- rived，which are used to compute stee1．concrete composite beams under the distributed and concentrated load．The calculated results with these formulas agreed relatively with the computed deflection f0r the steel-concrete compos- ite beam ，based on Goodman theory and with the calculated deflection on the basis of the reduced stiffness method 【引． When deflections for thin cold．formed steel hat section．concrete composite beams are calculated．the part of concrete in the hollow of the cold．formed steel are also stretched and craked，SO as to withdraw work because the cold—formed thin steel hat section is subjected to a tension．Therefore，the sum of the rectangular concrete plate and the．cold—formed steel are approxtmately taken