基于EB-Rep的非规则层状地质体智能建模方法研究.pdfVIP

Vo l. 3 No.3 第3 是在第 3 期 2014 年5 月 网络新媒体技术 May.2014 基于 EB -Rep 的非规则层状地质体智能建模方法研究* 魏振华刘志锋徐弗 (东华理工大学信息工程学院南昌 330013 ) 摘要:为实现层状地质体的智能建模，通过分析层状地质体的特征，针对连续非倒转型非规则层状地质体，顾及到地层尖灭和 透镜体，采用扩展的 B -Rep 数据模型(EB - Rep) ，提出了层状地质体智能建模方法。首先分析研究区域地层分布状况，生成 该区域标准地层层序字典，再通过钻孔与字典按规则匹配，实现钻孔地层智能对比，并利用 ~URBS 模型拟合生成光滑地层框 架，最终生成真三维地质体模型。实际应用表明该方法显著提高了三维地质建模过程的效率和模型的精度3 关键词:EB -Rep ，连续非倒转，层状地质体，智能建模，NURBS Research 00 Auto - modeliog Method of Irregular Stratified Geological Solids Based 00 EB - Rep WEI Zhenhua , LIU Zhife吨， XU Wei ( Sch∞1 of Information Engineering , East China Institute of Technology , Nanchang , 33∞13 ， China) Abstract: In order to create stratified geological solids automatically , through analyzing its features , the paper presents auto - model- ing method of the continuous and non - overtumed stratified geological solids based on EB - Rep platform adopting the extended B - Rep (EB - Rep) data model , considering stratum pinch - out and lens. Firstly , analyze the stratum distribution of the research area to generate the normal stratigraphic sequence dictionary. Secondly , match the borehole and dictionary by rules to finish the stratigraphic auto - correlation. Thirdly ，且t smooth stratum framework using NURBS. Finally , establish the true 3D geological models. Practical ap- plication shows that the auto - modeling solution improves the efficiency of 3D geological modeling and the model precision. Keywords: EB - Rep , continuous and non - overturned , stratified geological solids , auto - modeling , NURBS 在地质信息科学领域，随着地矿信息化的深人开展和计算机技术的深入应用，使得在