槽轮机构CADCAM系统开发.docx

槽轮机构CAD/CAM系统开发摘要：槽轮机构具有结构简单，传动效率高，设计和制造方便等优点被广泛应用于轻工自动机械行业。本论文主要利用Proe软件作为开发工具，通过参数化设计建立了槽轮机构的CAD/CAM系统，该系统包括槽轮机构的各部件的参数化设计与计算、槽轮机构的装配参数化、运用CAD/CAM系统改变槽轮机构的外形大小等模块。并且用ANSYS软件的有限元方法对槽轮机构的接触应力大小进行详细的分析判断。全文分为五章，分别介绍了CAD技术的发展及前景、槽轮机构的组成及简介、CAD/CAM系统的总体设计、槽轮机构的三维参数化建模以及槽轮机构的有限元分析。关键词：槽轮机构，CAD/CAM系统，参数化设计，有限元分析Slot Wheel Mechanism CAD/CAM System DevelopmentAbstract: slot wheel mechanism is widely used in light industry automatic machinery industry because of its simple structure, high transmission efficiency, convenient design and manufacturing. This thesis mainly uses Proe software as a development tool, slot wheel mechanism is parametric established by CAD/CAM system. This system includes parametric design and calculation of slot wheel mechanism main parts, the slot wheel mechanism assembly parameters. CAD/CAM system was used to change the shape and the size of the slot wheel mechanism and other modules. The finite element method of ANSYS software is a detailed analysis and judgment of the contact stress of the groove wheel mechanism. The full text is divided into five chapters. Respectively, this paper introduced the development of CAD technology and prospects, slot wheel mechanism and composition of introduction, the overall design of a CAD/CAM system, slot wheel mechanism of 3D parametric odelingnd finite element analysis of groove wheel mechanism.Key words: Geneva wheel mechanism, CAD/CAM system, parametric design, finite element analysis目录1 绪论11.1 CAD技术的国内外现状11.2 CAD技术的发展历程21.3 CAD技术的发展趋势31.4本课题研究目的及意义51.4.1 研究目的51.4.2 研究意义52 槽轮机构的结构分析72.1 槽轮机构简介72.2 槽轮机构的优缺点83 槽轮机构CAD系统总体设计93.1槽轮机构CAD系统开发软件93.1.1 Pro/Engineer工程软件的简介93.1.2 Pro/Engineer工程软件的特点103.2 槽轮机构的CAD系统设计103.2.1槽轮机构从动槽轮的参数化设计113.2.2 槽轮机构主动拨盘的参数化设计123.2.3 槽轮机构底架的参数化设计134 槽轮机构的三维参数化建模154.1 槽轮机构的总体结构设计154.1.1槽轮机构的从动槽轮的设计154.1.2 槽轮机构主动拨盘的设计194.1.3槽轮机构底架的设计234.2槽轮机构的装配设计264.3槽轮机构的参数化分析275 槽轮机构的有限元分析315.1 有限元方法概述315.2应用软件ANSYS的介绍315.3槽轮机构的有限元分析336结束语39参考文献40致谢42 1 绪论计算机辅助设计CAD(ComputerAidedDesign)技术自二十世纪50年代开始发展至今