模具点浇口自动脱落机构设计及仿真.doc

模具点浇口自动脱落机构设计及仿真 摘要AutoCAD绘制出了该方案的结构总体图。并根据确定的结构方案以及总体结构图设计出使用该机构成型的产品工件图。详细分析了塑件模具的结构形式、注塑机类型的选择、分型面的确定、浇注系统的设计、脱模机构中主要零部件的设计等。最终利用pro-e软件制作了模具点浇口自动脱落机构动作的仿真过程。同时还记录了在设计推出机构过程中运用的技术、理论、方法及其他相关知识。 通过本次设计，使我在塑料成型、材料加工技术、机械设计、机械制图等相关课程得到了巩固并为今后的工作打下了良好的基础。 关键词： Design and Simulation of automatic shedding mechanism for mould point gate Abstract：Described in this paper is about shell injection mold gate automatic shedding mechanism design process, more detailed describes the needle-gatefreezingmaterial automatically launch mechanism application and relates to the complete procedure, based on the existing machine and the structure of the mould, through exposure to mold pouring point automatic shedding mechanism of selection, to determine the mould with pin point gate off automatically mechanism design scheme, draw the plan the overall structure of the graph by using AutoCAD. According to the structure plan and the overall structure diagram, the product workpiece map of the mechanism is designed.. The structural form of plastic parts, the choice of injection molding machine, the determination of parting surface, the design of gating system and the design of main components in the mould release mechanism are analyzed in detail.. Finally, the simulation of the action of the mould point gate is made by Pro-E software.. At the same time, the technology, theory, method and other relevant knowledge used in the design of the mechanism are also recorded.. Through the design, I made it in the plastic molding, material processing technology, mechanical design, mechanical graphics and other related courses have been consolidated in the future work to lay a good foundation. Keywords: point gate, mould, mechanism design 目 录 1 引言 2 1.1 中国模具产业前景 2 1.2 注射模具发展的情况 3 2 制件分析 5 2.1 计算制件的容积和质量 5 2.2 制件注塑加工制造数据的制定 5 3 模具凝料自动脱落机构设计 6 3.1 顶杆机械结构设计 7 3.1.1 推出装置的选取准则 7 3.1.2 推出力的求解 8 3.1.3 推出机构的推板的设计 9 3.2 注射模模型设计 9 3.2.1 凹模数量的制定 3.2.2 凹模的分布 21 3.2.3 模具分型面的设计 10 3.2.4 流道系统设计 11 3