基于CATIA的公交车骨架建模方法研究.pdfVIP

基于CATIA 的公交 骨架建模方法 赵文亮，徐鹏，王嬴 长安大学汽车学院，陕西 西安 710064 ） 要：公交车骨架建模目前尚没有统一的建模方法，建模工具品种繁多，多根据工程师的经验及个人喜好进行建 模。CATIA 软件具有强大的三维建模能力和智能化的树结构，在车身设计中得到越来越广 的应用。在CATIA 建 模过程中，建模方法对于提高建模效率，确保建模的准确性和后期修改的方便性至关重要。本文介绍了基于CATIA 的公交车骨架建模方法及快速建模技巧，得到了较高质量的几何模型，模型可修改性较强，建模效率高，为公交车 骨架CATIA 快速建模提供了方法参考。 关键词：公交车；CATIA ；骨架；建模 中图分类号：U469.1 文献标识码：A 文章编号：1671-7988(2015)06-71-03 Bus Skeleton Modeling Method Based on CATIA Zhao Wenliang, Xu Peng, Wang Ying ( Automobile Changan University, Shaanxi Xi an 710064 ) Abstract At present, there is still no unified modeling approach for modeling bus skeleton, and a wide variety of modeling tools.Mostly,a lot of engineers make bus skeleton models according to their experience or habits. CATIA has been widely used in car body design because of its powerful three-dimensional modeling capabilities and intelligent tree structure. In CATIA modeling, modeling methods are crucial for improving the modeling efficiency, ensure the accuracy of the modeling and convenience of post-modification.In this paper, I introduced a bus skeleton modeling method and quick modeling skills based on CATIA,and get a higher quality of the geometric model which can be modified convenient;provide a method for rapid modeling bus skeleton as reference. Keywords Bus; CATIA; Skeleton; Modeling CLC NO.: U469.1 Document Code: A Article ID: 1671-7988(2015)06-71-03 进行重复修改，从而能够极大提高工程师的工作效率，缩短 引言 [1] 产品开发周期 。 公交车骨架结构的设计不仅要考虑到整车的承载能力、 1、CATIA 建模方法 各个零部件的强度要求，而且需要协调车身各系统的安装以 及底盘、侧围和前后围之间的连接，还要使底盘各装置的安 1）建立统一的坐标系 装在符合