变电站自动化系统中通信管理机的设计检测技术与自动化装置专业论文.docxVIP

山东建筑大学硕士学位论文Design 山东建筑大学硕士学位论文 Design of the Communication Manager in Automation of Electric Systems Zhao Qi(Detection Technology＆Automation Equipment) Directed by Yao Qing mei AB STRACT The networking and intelligence development of power system has put forward higher requirements of integrated substation automation system，owing to the variety of smart devices with different network communication structure，its diversity has brought the question how to achieve interoperability and equipment compatibility．Based on the realization of reliable communication and communication compatibility,this paper has made deep research on the communication manager,which has been applied to substation automation system，and designed as well as researched the communication manager based on ARM7 and laCOS embedded operating system．The communication manager,which is the core of substation，as the interface device between communications network and monitoring equipment，is used in receiving the control unit data and transmitting the data to SCADA or remote operating control center after the data has been processed．At the same time，the system Can also transmit the command from SCADA or remote operating system control center to the lower protector．The design of the communication manager functions mainly as the key point，and Can also finish processing data and transmitting communication protocol，in order to achieve the”four remote”function of the substation automation system． According to functional demands，this paper talks about the design and realization of communication manager based on ARM7 and I．tCOS-II embedded operating system in hardware and software respects．Hardware and software designs have adopted modular structure respectively,which have improved the system reliability and operability of the system．the hardware design has been accomplished through the ARM7 core board and peripheral equipment，which made design with high quality and low price．The module，which has been designed ac