卡乐控制器PCO控制器说明.pdf

1 2 3 xs pCO / pCO / pCO / pCO 应用程序 并联压缩机机组标准程序 序代码:FLSTDMFC0A 我们希望节约您的时间和金钱！ 通过阅读本手册，可以确保你能正确的安装和安全的使用本设备 IMPORTANT WARNINGS BEFORE INSTALLING OR HANDLING THE DEVICE PLEASE CAREFULLY READ AND FOLLOW THE INSTRUCTIONS DESCRIBED IN THIS MANUAL. This appliance has been manufactured to operate risk-free for its specific purpose, as long as: it is installed, operated and maintained according to the instructions contained in this manual; the environmental conditions and the voltage of the power supply correspond to those specified. All other uses and modifications made to the device which are not authorised by the manufacturer are considered incorrect. Liability for injury or damage caused by the incorrect use of the device lies exclusively with the user. Please note that this unit contains powered electrical devices and therefore all service and maintenance operations must be performed by specialist and qualified personnel who are aware of the necessary precautions. Disconnect the machine from the mains power supply before accessing any internal parts. Disposal of the parts of the controller: The controller is made up of metal and plastic parts and contains a lithium battery. All these parts must be disposed of according to the local standards in force. 目录： 1. 程序 5 1.1. 版本 2.0 的主要特点 5 1.2. 主要特征 5 1.3. 兼容的硬件 5 2. 用户界面 错误！未定义书签。 2.1. LED 灯光 5 2.2. 手操器 错误！未定义书签。 2.3. PCOT*, PCOI* OR PGD*I 的 15 键外部终端 6 内置按钮( pCO² or pCOXS)和 PGD0*F 7 3. 启动机组 8 3.1. 选择语言 8 3.2. 更新软件 8 3.3. 基础配置 8 3.4. 输入/输出 9 4. pLAN 10 4.1. 在 pLAN 上的终端 11 5. 通用设定 11 5.1. 比例带 11 5.2. 死区 12 6.压缩机管理 13 6. 通用设定 13