搅拌摩擦焊温度场数值模拟-材料加工工程专业论文.docxVIP

兰州理工大学硕士论文 兰州理工大学硕士论文 摘要 Abstract Friction stir welding is being applied widely because of its excellent performance．This complicated involyes in such four interactive factors temperature variation，microstructure transformation，strain and metal flOW．Numerical stimulation iS adaptively used in thiS field for analyzing join mechanism．Temperature．field analysiS iS principal for understanding metal flow and post welding stress．rhiS study objected ascertain distribution different positions any time． The characteristic positions for measuring temperature according different thick workplate in thiS paper．Lots of Measured temperature values，in different processing parameters，roughly described temperature distribution in joint，and the gist for testing Simulation result． The simplified thermal input model established，combining the thermal model provided by M．Song and real～time power of friction stir welding acquired from the energy measuring system．The moving thermal different weld velocity Utili zed succeedingly in this paper via moving coordinate system．The whole temperature field in any sections different time and the thermal cycle of positjons obtained． In allusion to thin alloy LYl2 plates，the simulation result compared with the measured temperature．The thermal model tested and modi fled，the simulation method validated and the laws of temperature distribution acquired in the welding process．The notion，apropos preheating time，was brought forward based steady temperature in transient analysis．Varying the parameters in the thermal model，the figures of temperature di stribution gained，in*hich the thin corresponded bowl，and the thick ThiS study established foundation for further analyzing frjctiOil stjr welding mechanisin,and accelerate its applying in engi neering． Key words：friction stir welding temperature field preheating numerical simulatiOn software