摇臂轴支座加工工艺及夹具的设计（有原图+开题报告）.docVIP

PAGE PAGE III 摘要 本次设计是巩固我们在大学学到的知识，对所学到的知识进行一次综合的检测和应用。应用课本的知识，设计零部件的工艺及夹具。在设计的过程中我养成了查阅资料的能力，同时掌握课外知识，丰富的网络资料为我的设计提供了充足的资料。 气门摇臂轴支座的工艺夹具设计，我们首先需要掌握机械制造工艺规程。其次要进行工艺方案论证，及机械加工余量计算，工艺尺寸的确定等。同时也使我们在编写技术文件及查阅技术文献等各个方面受到一次综合性的检查，初步具备设计一个中等复杂程度零件的工艺规程的能力。在加工中除了需要机床、刀具、量具之外，还需要机床夹具。它们是机床和工件之间的连接装置，使工件相对于机床或刀具获得正确的位置。机床夹具直接影响工件加工表面的位置精度，所以夹具设计是装配设计中一项重要的工作。能够合理的设计出夹具，也是工艺设计的一个关键过程。 关键词：门摇臂轴支座；机械制造工艺设计；夹具设计；装配设计  Abstract The design is to consolidate our university learned of the learned to conduct a comprehensive inspection and application. Applications textbook knowledge, craft and design components fixture. In the design process I developed the ability to access to information, as well as extra-curricular knowledge to master, a rich network of information for my design provides sufficient information. Valve rocker shaft support fixture design process, we first need to have mechanical manufacturing process planning. Second, we must carry out technology demonstration program, and machinery allowance calculation process to determine the size and the like. We are also at the same time in all aspects of the preparation of technical documentation and technical literature, etc. Now a comprehensive inspection, the preliminary design of a technological process has moderately complex parts capacity. In addition to the processing machine tools, cutting tools, measuring tools, we also need Fixture. They are the connecting means between the machine tool and the workpiece, the workpiece relative to the machine or tool to obtain the correct position. Fixture directly affect the position accuracy of the workpiece surface, so the assembly fixture design is the design of an important work. Can reasonably designed fixture, a key process is the process design. Keywords: door rocker shaft bearings; mechanical manufacturing process design; fixture design; design for assembly 目录 TOC \o 1-3 \h \z \u 摘要 I Abstract II 第1章 零件的分析 1 1.1零件的作用 1 1.2 零件的图形的分析 1 1.3材料及热处理分析 1 第2