《塑性成形CAE技术及应用》课程教学大纲.docVIP

PAGE PAGE 1 塑性成形CAE技术及应用 一、课程介绍 《塑性成形CAE技术及应用》是材料成型及控制工程专业的一门专业选修课，是将CAE技术与塑性成形有机融合，综合性和实践性较强的课程。 金属塑性成形CAE技术主要利用有限元技术对塑性成形的应力、应变进行数值模拟分析，预测应力集中、开裂、起皱等缺陷，解决典型塑性成形中涉及的工艺问题。通过预测成形过程中的裂纹、起皱、减薄、回弹，评估成形性能与成形工艺的可行性，从而为工艺优化与模具设计提供依据。通过本课程学习，能掌握有限元分析软件的使用，能对工件的可加工性能作出早期的判断，预先发现成形中可能产生的质量缺陷，并模拟各种工艺方案，通过仿真进行优化设计，获得最佳的工艺方案和工艺参数。 本课程所讲述的内容包括塑性成形力学基础、板料成形缺陷及其预测与控制、有限元方法的基本原理、等参数单元、动力显式算法、板料成形数值模拟及CAE软件介绍等共5章，教学部分共包含理论20学时，实验4学时。 Introduction This course is a main specialized course for students majoring in material forming and control engineering, which is a comprehensive and practical course by integrating the CAE and the plastic forming. The CAE technology of metal plastic forming can simulate and analyze the stress and strain of plastic forming by using the finite element method, and predict stress concentration, cracking, wrinkling defect, etc. This technology can solve complicated problems of sheet metal forming, such as bending, drawing and other typical process, and stretch bending, hot stamping and other special forming process. The technology can predict crack, wrinkling, thinning, springback of sheet metal forming, and evaluate forming property of materials, which provides help for sheet metal forming process and die design. Through studying of the course, students can master the abilities of using finite element analysis software, making the early judgment on the workability of workpiece, discovering possible defects in quality forming, and simulating various process. Through simulating, students can optimize the design, and get the best process route and process parameters. The content of this book includes: mechanical fundamental of plastic forming, forming defects of sheet metal and their prediction and controlling, principles of finite element method, isoparametric FE, dynamic explicit method, numerical simulation and the introduction to CAE softwares, total five chapters, it will take 20 theoretical lessons, 4 lab tutorials. 课程基本信息 课程名称 塑性成形CAE技术