考虑电极效应的Mindlin板方程的修正系数.docVIP

  Correction Factors of the Mindlin Plate Equations with the Consideration of Electrodes# DU Jianke, CHEN Guijia, WANG Wenjun, WU Rongxing, MA Tingfeng, 5 10 15 20 25 30 35 40 WANG Ji** (Piezoelectric Device Laboratory, School of Mechanical Engineering and Mexhanics, Ningbo University, ZheJiang NingBo 315211) Abstract: The Mindlin plate theory has been playing a role vital in the analysis of high frequency vibrations of quartz crystal resonators at the thickness-shear mode. The coupled equations with infinite number of vibration modes have been truncated to retain essential ones with strong couplings for simplified analysis, and correction factors have been introduced to ensure exact solutions at cut-off frequencies as part of the validation procedure. Starting form plates without complications, correction factors have also been modified to include electrodes for their mass effect. Such results have been important to higher-order correction factors to ensure accurate consideration of electrodes in the AT-cut quartz crystal plates. The findings in factors systematic study are readily available for the analytical equations with selected modes with strong couplings, and equally convenient for the implementation of the finite element analysis with the Mindlin plate equations. Keywords: Mindlin; plate; vibration; shear; correction; crystal; resonator 0 Introduction The Mindlin plate equations has been established specifically for the high frequency vibrations of quartz crystal plates in the thickness-shear modes, which differ from traditional objectives of the analysis of structural vibrations which are concerned usually with flexural modes. The essential reason of such a problem and the need of Mindlin plate equations is that the plate is vibrating at the thickness-shear mode to offer a stable frequency source or reference in applications of circuits with a piezoelectric resonator. The inclusion of the thickness-shear modes in the plate equations by Mindlin has rev