板式浇注系统凝料脱模机构设计及仿真.doc

推板式浇注系统凝料脱模机构设计及仿真 摘要,确定推板式浇注系统凝料脱模机构设计的方案设计过程。并经过严密设计,确定推板式浇注系统凝料脱模机构设计的方案，利用AutoCAD绘制出了该方案的结构总体图。然后根据确定的机构方案以及总体结构图设计出使用该机构成型的产品形状图。详细分析了塑件模具的结构形式、注塑机类型的选择、分型面的确定、浇注系统的设计、脱模结构中主要零部件的设计等。最终利用Pro/E软件制作了推板式浇注系统凝料脱模机构动作的仿真过程。于此同时记录了在设计推出机构过程中运用的技术、理论、方法以及其他相关知识。通过该课题设计，可以进一步了解常用机械加工设备应用以及模具结构原理等，形成一整套模具加工工艺方案，能够综合运用所学专业知识设计机械及相关产品及其零部件，能够独立熟料地检索各方面文献资料。 关键词：Push plate type gating system setting feeding Demoulding mechanism design and simulation Abstract：This paper introduces the use of push plate pouring system demoulding mechanism of coagulation material processing cup of the cup cover throughout the design process more detail described needle-gatefreezingmaterial automatically launch mechanism of the application and the design of the steps to complete. According to the existing mechanical and mould mechanism, the design procedure of the design of the mould release mechanism for the ejector plate is determined by the analysis of the mould gate drop off structure.. And through the strict design, determine the design of the material release mechanism of the push plate pouring system, and draw the structure diagram of the plan by AutoCAD.. Then according to the structure plan and the overall structure diagram, the product shape chart of the mechanism is designed.. The structural form of plastic parts, the choice of injection molding machine, the determination of parting surface, the design of gating system, the design of main components in the structure of mould release are analyzed in detail.. The simulation process of the action of the ejector plate mould release mechanism of the ejector plate was fabricated by Pro/E software.. At the same time, the technology, theory, method and other relevant knowledge used in the design of the mechanism are recorded.. Through the design of the subject can be further understanding common mechanical processing equipment application and mould structure principle, forming a set of mold processing technology schem