电气工人专业测试题.docVIP

Swire Beverages (Dongguan) Ltd. 太古饮品（东莞）有限公司 机械/电气工程人员专业测试题 (一) 机械专业测试题 1、您所用的气动元件，进气压力是多少？ 2、气缸由哪几部份组成？ 3、润滑油分为哪几类？ 4、离心泵的哪一部份最易损坏？ 5、如果维修中一个螺丝断在孔里面，该如何处理？ 6、你接触过哪几种皮带？哪几种阀门？ 7、请画一个齿轮固定在轴端的简图。 8、M8螺纹的螺距是多少? 攻M8的普通粗牙螺纹应选多大的钻头钻孔？ 9、请说出你知道的3种钢材及牌号 10、 请说出你知道的3种机加工设备 11、 请说出你知道的3种螺丝防松方法  (二) 电气专业知识测试题: 12、你熟悉的几种PLC型号，列出几个常用的编程指令，并编写一段时钟程序。 13、请列出你熟悉的集成电路型号名称（5-10个）。 14、何谓“PID”调节？请阐释其意义，并说明应用场合及调试的一般方法。 16、何谓“零点漂移”？请解释其意义，并说明解决方法。 5、请设计一台30KW马达的Y—Δ起动控制电路（注意所用电器元件的型号、规格）  （三）、 其他（工程管理人员适用） 1、什么是预防性维修保养?包括那些内容,举出您在这方面所做的两件事及结果. 2、如何进行备件管理? 3、如何激励您的下属?请举两个例子. 四、英语 Please brief the job goal and description of your current position in your company. (This section should contain a brief statement indicating the overall performance or functions of your position I. Please Translate the following Paragraph into Chinese. Anti-Slime Treatment (Operating principle) During operation of the plant, some of the bottle contents will inevitably be spilled on to the conveyors due to overflow during filling or accidental breakages. Some of this spillage will be cleaned away by the normal lubrication of the plant, but this in itself is not sufficient to remove all traces of the fermentable deposits which build up over a period of time. These deposits provide ideal breeding grounds for many different species of microbes, with the consequence of unpleasant odours and hygiene problems. Moreover, the slime formed is drawn into the pasteuriser tunnels where it act as an inoculum, thus contributing, often as the principal cause, to the formation of so-called “algae” in the tanks. All this can be avoided by introducing a suitable quantity of biocide into the lubrication lines. The product used must obviously be stable and active in the presence of diluted lubricant solutions (0.5-1.5^) and must not have an adverse effect on the friction coefficient value. One suitable product is MERAK 112 – Diversy which must be delivered in a 0.1% solution for 30 minutes every 3 hours or operati