搅拌反应器流场与动力性能的模拟及实验研究-化工过程机械专业论文.docxVIP

郑州大学项士学位论文有利于搅拌槽内物料的搅匀、混合，属于循环型桨叶。对于不同的混合要求和操 郑州大学项士学位论文 有利于搅拌槽内物料的搅匀、混合，属于循环型桨叶。对于不同的混合要求和操 作条件，应该选择不同的桨型，如果要求剪切作用较强，就应该选择剪切型桨叶； 如果对剪切作用的要求不是很高，只要能够满足物料整体混合的要求，在节省功 率消耗的前提下，应该选择循环型桨叶。 7．使用FLUENT模拟软件与PIV测速系统相结合的方式对搅拌反应器进行 设计、优化和选型可以更经济、快捷、可靠。 关键词：搅拌反应器；CFD；DPIV；多重参考系法 lI 郑州大学硕士学位论文ABSTRACT 郑州大学硕士学位论文 ABSTRACT The stiffed reactor is the widespread applied reactor type in the process industry, and it takes a leading position in chemistry and chemical industry．In a long period， scholars from different countries have taken lots of deep researches on the flow field characters of stirred tank,and more and more scholars become cognizant that it’S important to obtain flow information accurately in reactor for optimizing design and developing new stirred reactor． This paper firstly has rese西ched the inner flow field of a stirred reactor assembled with flat blade impeller and 45。angle pitched impeller respectively,and used experiment results obtained by PⅣsystem to check the reliability of FLUENT simulation results．Then,used software FLUENT to如rther research and analyze the flow field character parameters such as macroscopic regularity,velocity character, turbulent performance，shear performance and power consumption，and obtained such conclusions as following： 1．Through the qualitative and quantitative analysis on macroscopic regularity and velocity character of flow field in stirred tank,it’S showed that the flow field character and data curve obtained by two methods are basically salne．the numerical simulation method used in this paper is feasible,and the results are reliable．The flow field treating methods such as MRF-RNG k-e turbulent model and boundary conditions selected in simulating process have perfect adaptability for flow field analysis in stirred reactor． 2．The“two circulation flow’formed by flat blade impeller is obviously different from the‘whole circulation flOW’formed by 450 angle pitched impeller,SO tlley express different effect to fluid：flat blade impeller w