货物运输监控系统.docx

毕业设计说明书（毕业设计） 独创性声明 本人声明所呈交的毕业设计说明书(毕业设计)是本人在导师指导下进行的研究、设计工作后独立完成的。除了文中特别加以标注和致谢的地方外，说明书中不包含其他人己经发表或撰写过的研究成果。对本文的研究所做贡献集体和个人，均己在说明书中作了明确的说明并表示谢意。本人完全意识到本声明的法律后果由本人承担。 毕业设计说明书（毕业设计）作者签名(手写): 日期: 年 月 日 指导教师签名(手写): 日期: 年 月 日 货物运输监控系统 摘要：为了能准确且高效的获取货物运输环境状况，本文设计了一套可用于对车辆运输货物监控车厢内环境监测系统的方案，该方案采用DHT11来实现对车厢内温湿度信息进行检测，通过人体热释电传感器来对是否有人进行检测。本套设计方案采用CC2530单片机作为系统的主控芯片，搭配ZigBee通信模块、温湿度检测传感器、人体检测传感器以及其它外围I/O设备，通过方案论证，最终确定了本文方案。 在对设计出的硬件系统进行测试时，系统通过ZigBee模块将数据从A板发送到B板，B板通过串口与电脑端上位机相连，通过模拟不同温湿度环境和是否有人存在的情况，上位机均能进行正常显示，且可以将监测数据存储在制定位置，以备后续记录的提取。从整体上看，本文设计了一套货物运输监控系统，并且可以成功实现对温湿度和人体的检测以及对监测数据的记录。 关键词：货物运输监控；温湿度检测；人体检测；ZigBee通信；上位机  Timi Abstract：In order to accurately and efficiently obtain the environmental conditions of cargo transportation, this paper designs a scheme that can be used to monitor the environment in the compartment of the vehicle transportation cargo. In this scheme, DHT11 is used to detect the temperature and humidity information in the compartment, and the human body pyroelectric sensor is used to detect whether there are people. This set of design scheme uses CC2530 MCU as the main control chip of the system, with ZigBee communication module, temperature and humidity detection sensor, human body detection sensor and other peripheral I/O equipment. Through the demonstration of the scheme, the scheme of this paper is finally determined. In the design of the hardware system testing, system through the ZigBee module sends data from A plate to plate B, B plate are connected to the computer terminal PC via A serial port, through the simulation of different temperature and humidity environment and whether someone is, for PC, according to the normal and the monitoring data can be stored in the location, the extraction for follow-up records. On the whole, this paper designs a set of cargo transport monitoring system, and can successfully achieve the detection of temperature, humidity and human body as well as the record of monitoring dat