高介电常数材料和噪声抑制材料的太赫兹光谱测量-光学工程专业论文.docxVIP

华 中 科 技 大 学 硕 士 学 位 论 文 II Abstract With the development of electronic technology, high performance computer and electronic equipment require higher electronic material characteristics. Among all the parameters, permittivity is one of the most important indices of electronic materials. High permittivity can reduce the space of electronic equipment and achieve more multifunctional and higher speed, which has a profound impact on the development of electronic industry. The development of the computer’s performance, especially that of working frequency and integration level, brings electromagnetic compatibility problem and puts forward higher requirements on the anti-jamming and noise suppression ability of electronic equipment. In this thesis, we have manufactured high permittivity material in sol-gel method and noise suppression material through mixing the phosphided carbonyl iron powder in vulcanized rubber. The traditional analytical methods to these materials are differential thermal analysis, TGA, XRD and SEM, but few studies on 0.1THz to 3 THz. Terahertz technology has been widely used in many areas for its low energy, good transient and high SNR. In this thesis we have detected high permittivity material and noise suppression of different thickness and constituent through terahertz time-domain spectroscopy technology, we have got time domain of different materials and frequency domain through FTT. After processing the data, we have got absorption spectrum, transmission spectrum and reflection spectrum. And we have comparatively analyzed different thickness and constituent of its absorption spectrum, transmission spectrum and reflection spectrum. We got dielectric constant curve from 100Hz to 200kHz through traditional method. After the data processing we have got dielectric constant curve from 0.1THz to 3THz through terahertz time-domain spectroscopy technology and juxtaposed it with the low frequency band. The results show that the prepared high