On the static friction-毕业论文翻译.docVIP

On the static friction Abstract: When two mutual contact and in a relatively stationary objects relative motion exists between the trend, there is static friction generated. Static friction force and relative movement direction of the trend in the opposite direction, and contacts, facial cut, the largest objects in static friction with the contact surface between the positive pressure is proportional to. Keywords: static friction; maximum static friction force; balance. In the teaching process, many students are often found when the analysis of static friction from time to time errors judgments The reason is that these students did not really understand the conditions of static friction generated and its characteristics. When two mutual contact and in a relatively stationary objects relative motion exists between the trend, there is static friction generated. Static friction force and relative movement direction of the trend in the opposite direction, with access to facial cut. To help students to deal with the issue of static friction, are presented the following two methods. 1, according to analysis of static friction generated by the conditions Of static friction necessary and sufficient conditions are: ① two objects in contact; ② two objects with each other under pressure; ③ contact surface is not smooth; ④ there is relative motion between two objects, the trend. Of which the first three conditions are relatively easy to judge. However, the two objects in contact with the relative motion between the availability of the trend to become the basis for judging static friction. “Trends in relative motion” must be two objects in contact with each other each other frame of reference, rather than outside the two objects as reference objects. Assumptions commonly available method: first, assume that contact surface is smooth, and look at the object being studied in relation to whether the contact surface movement, to whom the campaign,